.DDR 73dffea49e typ 23/09/20-14:18:32,fwver: v1.14 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:26.7%, TX Vref:19.8%,0.0% CH1 RX Vref:26.7%, TX Vref:22.8%,0.0% CH2 RX Vref:26.3%, TX Vref:21.8%,0.0% CH3 RX Vref:28.5%, TX Vref:19.8%,0.0% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out U-Boot SPL board init U-Boot SPL 2017.09-gd1fdcb4853-230928-dirty #dj (Feb 05 2026 - 05:07:53) Trying to boot from MMC1 SPL: A/B-slot: _a, successful: 0, tries-remain: 7 Trying fit image at 0x4000 sector ## Verified-boot: 0 ## Checking atf-1 0x00040000 ... sha256(6f85d1c4de...) + OK ## Checking uboot 0x00200000 ... sha256(8f5e614d49...) + OK ## Checking fdt 0x00366f40 ... sha256(7eafe7c645...) + OK ## Checking atf-2 0x000f0000 ... sha256(aa71013e72...) + OK ## Checking atf-3 0xff100000 ... sha256(225d6bf071...) + OK Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000) Total: 76.65/231.600 ms INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-652-g24b7dd41a:derrick.huang, fwver: v1.43 NOTICE: BL31: Built : 14:53:32, Sep 26 2023 INFO: spec: 0x1 INFO: ext 32k is not valid INFO: ddr: stride-en 4CH INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0 INFO: l3 cache partition cfg-0 INFO: system boots from cpu-hwid-0 INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE init ialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2017.09-gd1fdcb4853-230928-dirty #dj (Feb 05 2026 - 05:07:53 +0000) Model: Vicharak RK3588 AXON VO.3 MPIDR: 0x81000000 PreSerial: 2, raw, 0xfeb50000 DRAM: 8 GiB Sysmem: init Relocation Offset: ed2f7000 Relocation fdt: eb1f9c10 - eb1fecd0 CR: M/C/I mmc@fe2c0000: 1, mmc@fe2e0000: 0 Bootdev(atags): mmc 0 MMC0: HS400 Enhanced Strobe, 200Mhz PartType: EFI DM: v2 =================begin=================== 274348 bytes read in 4 ms (65.4 MiB/s) DTB(Distro): rk3588-axon-linux.dtb Error binding driver 'fixed regulator': -22 Some drivers failed to bind I2c0 speed: 100000Hz vsel-gpios- not found! en-gpios- not found! vdd_cpu_big0_s0 800000 uV vsel-gpios- not found! en-gpios- not found! vdd_cpu_big1_s0 800000 uV I2c1 speed: 400000Hz vsel-gpios- not found! en-gpios- not found! vdd_npu_s0 800000 uV spi2: RK806: 2 ON=0x40, OFF=0x00 vdd_gpu_s0 750000 uV vdd_cpu_lit_s0 750000 uV vdd_log_s0 750000 uV vdd_vdenc_s0 init 750000 uV vdd_ddr_s0 850000 uV I2c6 speed: 400000Hz Device 'gpio@fd8a0000': seq 0 is in use by 'gpio@fd8a0000' Device 'i2c@fec80000': seq 6 is in use by 'i2c@fec80000' I2c6 speed: 100000Hz *** Warning - bad CRC, using default environment get vp0 plane mask:0x5, primary id:0, cursor_plane:2, from dts get vp1 plane mask:0xa, primary id:1, cursor_plane:3, from dts get vp2 plane mask:0x140, primary id:6, cursor_plane:8, from dts get vp3 plane mask:0x280, primary id:7, cursor_plane:9, from dts Device 'gpio@fec20000': seq 1 is in use by 'gpio@fd8a0000' Could not find baseparameter partition Model: Vicharak RK3588 AXON VO.3 LINUX MPIDR: 0x81000000 boot mode: None No resource file: logo.bmp =================begin=================== 512 bytes read in 21 ms (23.4 KiB/s) rockchip_read_distro_logo: Load logo.bmp from 0:3 =================begin=================== 188054 bytes read in 22 ms (8.2 MiB/s) rockchip_read_distro_logo: Load logo.bmp from 0:3 Rockchip UBOOT DRM driver version: v1.0.1 vp0 have layer nr:2[0 2 ], primary plane: 0 vp1 have layer nr:2[1 3 ], primary plane: 1 vp2 have layer nr:2[6 8 ], primary plane: 6 vp3 have layer nr:2[7 9 ], primary plane: 7 phy@fed80000: mode 0x02 is not support hdmi@fde80000 disconnected phy@fed90000: mode 0x02 is not support CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A) b0pll 24000 KHz b1pll 24000 KHz lpll 24000 KHz v0pll 24000 KHz aupll 786431 KHz cpll 1500000 KHz gpll 1188000 KHz npll 850000 KHz ppll 1100000 KHz aclk_center_root 702000 KHz pclk_center_root 100000 KHz hclk_center_root 396000 KHz aclk_center_low_root 500000 KHz aclk_top_root 750000 KHz pclk_top_root 100000 KHz aclk_low_top_root 396000 KHz Debug: buf[0] = 0x00, expected = 0x80 U-Boot console: ENABLED Net: eth1: ethernet@fe1c0000 starting USB... Bus usb@fc000000: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus usb@fc800000: USB EHCI 1.00 Bus usb@fc840000: USB OHCI 1.0 Bus usb@fc880000: USB EHCI 1.00 Bus usb@fc8c0000: USB OHCI 1.0 Bus usb@fcd00000: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus usb@fc400000: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fc000000 for devices... 1 USB Device(s) found scanning bus usb@fc800000 for devices... 1 USB Device(s) found scanning bus usb@fc840000 for devices... 1 USB Device(s) found scanning bus usb@fc880000 for devices... 1 USB Device(s) found scanning bus usb@fc8c0000 for devices... 1 USB Device(s) found scanning bus usb@fcd00000 for devices... 1 USB Device(s) found scanning bus usb@fc400000 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit key to stop autoboot('CTRL+C'): 0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x1 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x1 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x1 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x1 pcie@fe150000: PCIe-0 Link Fail Device 0: unknown device MMC: no card present mmc_init: -123, time 14 card not detected! switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:3... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf =================begin=================== 828 bytes read in 25 ms (32.2 KiB/s) phy@fed80000: mode 0x02 is not support hdmi@fde80000 disconnected phy@fed90000: mode 0x02 is not support SCRIPT FAILED: continuing... Device 2: unrecognized JEDEC id bytes: 00, 00, 00 unknown device Device 1: unknown raw ID 0 0 0 Device 0: unknown device Device 0: unknown device scanning bus for devices... SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp fbss pio slum part ccc apst Device 0: unknown device pcie@fe150000: failed to find reset-gpios property ethernet@fe1c0000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! phy_startup() failed: -110FAILED: -110missing environment variable: pxeuuid Retrieving file: /extlinux/pxelinux.cfg/01-0a-e7-d6-85-57-22 ethernet@fe1c0000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! phy_startup() failed: -110FAILED: -110Retrieving file: /extlinux/pxelinux.cfg/00000000 ethernet@fe1c0000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! phy_startup() failed: -110FAILED: -110Retrieving file: /extlinux/pxelinux.cfg/0000000 ethernet@fe1c0000 Waiting for PHY auto negotiation to complete........DDR 73dffea49e typ 23/09/20-14:18:32,fwver: v1.14 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:26.7%, TX Vref:19.8%,0.0% CH1 RX Vref:26.7%, TX Vref:22.8%,0.0% CH2 RX Vref:26.3%, TX Vref:21.8%,0.0% CH3 RX Vref:28.5%, TX Vref:19.8%,0.0% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz DDR 73dffea49e typ 23/09/20-14:18:32,fwver: v1.14 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:27.1%, TX Vref:20.8%,0.0% CH1 RX Vref:26.7%, TX Vref:22.8%,0.0% CH2 RX Vref:25.8%, TX Vref:21.8%,0.0% CH3 RX Vref:28.5%, TX Vref:19.8%,0.0% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz DDR 73dffea49e typ 23/09/20-14:18:32,fwver: v1.14 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:27.1%, TX Vref:19.8%,0.0% CH1 RX Vref:26.3%, TX Vref:21.8%,0.0% CH2 RX Vref:26.3%, TX Vref:21.8%,0.0% CH3 RX Vref:28.5%, TX Vref:19.8%,0.0% change to F1: 528MHz change to F2: 1068MHz DDR 73dffea49e typ 23/09/20-14:18:32,fwver: v1.14 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:26.7%, TX Vref:19.8%,0.0% CH1 RX Vref:26.3%, TX Vref:22.8%,0.0% CH2 RX Vref:26.3%, TX Vref:21.8%,0.0% CH3 RX Vref:28.5%, TX Vref:19.8%,0.0% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz DDR 73dffea49e typ 23/09/20-14:18:32,fwver: v1.14 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:26.7%, TX Vref:19.8%,0.0% CH1 RX Vref:26.3%, TX Vref:21.8%,0.0% CH2 RX Vref:25.8%, TX Vref:21.8%,0.0% CH3 RX Vref:28.5%, TX Vref:19.8%,0.0% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz DDR 73dffea49e typ 23/09/20-14:18:32,fwver: v1.14 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:26.7%, TX Vref:19.8%,0.0% CH1 RX Vref:26.7%, T DDR 73dffea49e typ 23/09/20-14:18:32,fwver: v1.14 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:26.7%, TX Vref:20.8%,0.0% CH1 RX Vref:26.3%, TX Vref:22.8%,0.0% CH2 RX Vref:26.3%, TX Vref:21.8%,0.0% CH3 RX Vref:28.5%, TX Vref:19.8%,0.0% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz DDR 73dffea49e typ 23/09/20-14:18:32,fwver: v1.14 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:27.1%, TX Vref:19.8%,0.0% CH1 RX Vref:26.3%, TX Vref:21.8%,0.0% CH2 RX Vref:26.3%, TX Vref:20.8%,0.0% CH3 RX Vref:28.5%, TX Vref:19.8%,0.0% change to F1: 528MHz change to F2: 1068MHz DDR 73dffea49e typ 23/09/20-14:18:32,fwver: v1.14 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:26.7%, TX Vref:20.8%,0.0% CH1 RX Vref:26.3%, TX Vref:22.8%,0.0% CH2 RX Vref:26.3%, TX Vref:21.8%,0.0% CH3 RX Vref:28.5%, TX Vref:19.8%,0.0% change to F1: 528MHz change to F2: 1068MHz DDR 73dffea49e typ 23/09/20-14:18:32,fwver: v1.14 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:27.1%, TX Vref:19.8%,0.0% CH1 RX Vref:26.7%, TX Vref:22.8%,0.0% CH2 RX Vref:26.3%, TX Vref:20.8%,0.0% CH3 RX Vref:28.5%, TX Vref:19.8%,0.0% change to F1: 528MHz change to F2: 1068MHz DDR 73dffea49e typ 23/09/20-14:18:32,fwver: v1.14 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:26.7%, TX Vref:19.8%,0.0% CH1 RX Vref:26.7%, TX Vref:21.8%,0.0% CH2 RX Vref:26.3%, TX Vref:21.8%,0.0% CH3 RX Vref:28.5%, TX Vref:19.8%,0.0% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz DDR 73dffea49e typ 23/09/20-14:18:32,fwver: v1.14 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:27.1%, TX Vref:19.8%,0.0% CH1 RX Vref:26.3%, TX Vref:21.8%,0.0% CH2 RX Vref:25.4%, TX Vref:21.8%,0.0% CH3 RX Vref:28.5%, TX Vref:19.8%,0.0% change to F1: 528MHz change to F2: 1068MHz DDR 73dffea49e typ 23/09/20-14:18:32,fwver: v1.14 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:26.7%, TX Vref:19.8%,0.0% CH1 RX Vref:26.3%, TX Vref:21.8%,0.0% CH2 RX Vref:26.3%, TX Vref:20.8%,0.0% CH3 RX Vref:28.5%, TX Vref:19.8%,0.0% change to F1: 528MHz change to F2: 1068MHz DDR 73dffea49e typ 23/09/20-14:18:32,fwver: v1.14 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:26.7%, TX Vref:19.8%,0.0% CH1 RX Vref:26.3%, TX Vref:22.8%,0.0% CH2 RX Vref:25.8%, TX Vref:21.8%,0.0% CH3 RX Vref:28.5%, TX Vref:19.8%,0.0% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out U-Boot SPL board init U-Boot SPL 2017.09-gd1fdcb4853-230928-dirty #dj (Feb 05 2026 - 05:07:53) Trying to boot from MMC1 SPL: A/B-slot: _a, successful: 0, tries-remain: 7 Trying fit image at 0x4000 sector ## Verified-boot: 0 ## Checking atf-1 0x00040000 ... sha256(6f85d1c4de...) + OK ## Checking uboot 0x00200000 ... sha256(8f5e614d49...) + OK ## Checking fdt 0x00366f40 ... sha256(7eafe7c645...) + OK ## Checking atf-2 0x000f0000 ... sha256(aa71013e72...) + OK ## Checking atf-3 0xff100000 ... sha256(225d6bf071...) + OK Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000) Total: 76.7/231.315 ms INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-652-g24b7dd41a:derrick.huang, fwver: v1.43 NOTICE: BL31: Built : 14:53:32, Sep 26 2023 INFO: spec: 0x1 INFO: ext 32k is not valid INFO: ddr: stride-en 4CH INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0 INFO: l3 cache partition cfg-0 INFO: system boots from cpu-hwid-0 INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2017.09-gd1fdcb4853-230928-dirty #dj (Feb 05 2026 - 05:07:53 +0000) Model: Vicharak RK3588 AXON VO.3 MPIDR: 0x81000000 PreSerial: 2, raw, 0xfeb50000 DRAM: 8 GiB Sysmem: init Relocation Offset: ed2f7000 Relocation fdt: eb1f9c10 - eb1fecd0 CR: M/C/I mmc@fe2c0000: 1, mmc@fe2e0000: 0 Bootdev(atags): mmc 0 MMC0: HS400 Enhanced Strobe, 200Mhz PartType: EFI DM: v2 =================begin=================== 274348 bytes read in 4 ms (65.4 MiB/s) DTB(Distro): rk3588-axon-linux.dtb Error binding driver 'fixed regulator': -22 Some drivers failed to bind I2c0 speed: 100000Hz vsel-gpios- not found! en-gpios- not found! vdd_cpu_big0_s0 800000 uV vsel-gpios- not found! en-gpios- not found! vdd_cpu_big1_s0 800000 uV I2c1 speed: 400000Hz vsel-gpios- not found! en-gpios- not found! vdd_npu_s0 800000 uV spi2: RK806: 2 ON=0x40, OFF=0x00 vdd_gpu_s0 750000 uV vdd_cpu_lit_s0 750000 uV vdd_log_s0 750000 uV vdd_vdenc_s0 init 750000 uV vdd_ddr_s0 850000 uV I2c6 speed: 400000Hz Device 'gpio@fd8a0000': seq 0 is in use by 'gpio@fd8a0000' Device 'i2c@fec80000': seq 6 is in use by 'i2c@fec80000' I2c6 speed: 100000Hz *** Warning - bad CRC, using default environment get vp0 plane mask:0x5, primary id:0, cursor_plane:2, from dts get vp1 plane mask:0xa, primary id:1, cursor_plane:3, from dts get vp2 plane mask:0x140, primary id:6, cursor_plane:8, from dts get vp3 plane mask:0x280, primary id:7, cursor_plane:9, from dts Device 'gpio@fec20000': seq 1 is in use by 'gpio@fd8a0000' Could not find baseparameter partition Model: Vicharak RK3588 AXON VO.3 LINUX MPIDR: 0x81000000 boot mode: None No resource file: logo.bmp =================begin=================== 512 bytes read in 21 ms (23.4 KiB/s) rockchip_read_distro_logo: Load logo.bmp from 0:3 =================begin=================== 188054 bytes read in 22 ms (8.2 MiB/s) rockchip_read_distro_logo: Load logo.bmp from 0:3 Rockchip UBOOT DRM driver version: v1.0.1 vp0 have layer nr:2[0 2 ], primary plane: 0 vp1 have layer nr:2[1 3 ], primary plane: 1 vp2 have layer nr:2[6 8 ], primary plane: 6 vp3 have layer nr:2[7 9 ], primary plane: 7 phy@fed80000: mode 0x02 is not support hdmi@fde80000 disconnected phy@fed90000: mode 0x02 is not support CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A) b0pll 24000 KHz b1pll 24000 KHz lpll 24000 KHz v0pll 24000 KHz aupll 786431 KHz cpll 1500000 KHz gpll 1188000 KHz npll 850000 KHz ppll 1100000 KHz aclk_center_root 702000 KHz pclk_center_root 100000 KHz hclk_center_root 396000 KHz aclk_center_low_root 500000 KHz aclk_top_root 750000 KHz pclk_top_root 100000 KHz aclk_low_top_root 396000 KHz Debug: buf[0] = 0x00, expected = 0x80 U-Boot console: ENABLED Net: eth1: ethernet@fe1c0000 starting USB... Bus usb@fc000000: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus usb@fc800000: USB EHCI 1.00 Bus usb@fc840000: USB OHCI 1.0 Bus usb@fc880000: USB EHCI 1.00 Bus usb@fc8c0000: USB OHCI 1.0 Bus usb@fcd00000: usb maximum-speed not found DDR 73dffea49e typ 23/09/20-14:18:32,fwver: v1.14 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:26.7%, TX Vref:19.8%,0.0% CH1 RX Vref:26.3%, TX Vref:22.8%,0.0% CH2 RX Vref:25.4%, TX Vref:21.8%,0.0% CH3 RX Vref:28.5%, TX Vref:19.8%,0.0% change to F1: 528MHz change to F2: 1068MHz DDR 73dffea49e typ 23/09/20-14:18:32,fwver: v1.14 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB Manufacturer ID:0xff CH0 RX Vref:26.7%, TX Vref:20.8%,0.0% CH1 RX Vref:26.7%, TX Vref:22.8%,0.0% CH2 RX Vref:25.8%, TX Vref:21.8%,0.0% CH3 RX Vref:28.9%, TX Vref:19.8%,0.0% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out U-Boot SPL board init U-Boot SPL 2017.09-gd1fdcb4853-230928-dirty #dj (Feb 05 2026 - 05:07:53) Trying to boot from MMC1 SPL: A/B-slot: _a, successful: 0, tries-remain: 7 Trying fit image at 0x4000 sector ## Verified-boot: 0 ## Checking atf-1 0x00040000 ... sha256(6f85d1c4de...) + OK ## Checking uboot 0x00200000 ... sha256(8f5e614d49...) + OK ## Checking fdt 0x00366f40 ... sha256(7eafe7c645...) + OK ## Checking atf-2 0x000f0000 ... sha256(aa71013e72...) + OK ## Checking atf-3 0xff100000 ... sha256(225d6bf071...) + OK Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000) Total: 75.780/231.766 ms INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-652-g24b7dd41a:derrick.huang, fwver: v1.43 NOTICE: BL31: Built : 14:53:32, Sep 26 2023 INFO: spec: 0x1 INFO: ext 32k is not valid INFO: ddr: stride-en 4CH INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0 INFO: l3 cache partition cfg-0 INFO: system boots from cpu-hwid-0 INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2017.09-gd1fdcb4853-230928-dirty #dj (Feb 05 2026 - 05:07:53 +0000) Model: Vicharak RK3588 AXON VO.3 MPIDR: 0x81000000 PreSerial: 2, raw, 0xfeb50000 DRAM: 8 GiB Sysmem: init Relocation Offset: ed2f7000 Relocation fdt: eb1f9c10 - eb1fecd0 CR: M/C/I mmc@fe2c0000: 1, mmc@fe2e0000: 0 Bootdev(atags): mmc 0 MMC0: HS400 Enhanced Strobe, 200Mhz PartType: EFI DM: v2 =================begin=================== 274348 bytes read in 3 ms (87.2 MiB/s) DTB(Distro): rk3588-axon-linux.dtb Error binding driver 'fixed regulator': -22 Some drivers failed to bind I2c0 speed: 100000Hz vsel-gpios- not found! en-gpios- not found! vdd_cpu_big0_s0 800000 uV vsel-gpios- not found! en-gpios- not found! vdd_cpu_big1_s0 800000 uV I2c1 speed: 400000Hz vsel-gpios- not found! en-gpios- not found! vdd_npu_s0 800000 uV spi2: RK806: 2 ON=0x40, OFF=0x00 vdd_gpu_s0 750000 uV vdd_cpu_lit_s0 750000 uV vdd_log_s0 750000 uV vdd_vdenc_s0 init 750000 uV vdd_ddr_s0 850000 uV I2c6 speed: 400000Hz Device 'gpio@fd8a0000': seq 0 is in use by 'gpio@fd8a0000' Device 'i2c@fec80000': seq 6 is in use by 'i2c@fec80000' I2c6 speed: 100000Hz *** Warning - bad CRC, using default environment get vp0 plane mask:0x5, primary id:0, cursor_plane:2, from dts get vp1 plane mask:0xa, primary id:1, cursor_plane:3, from dts get vp2 plane mask:0x140, primary id:6, cursor_plane:8, from dts get vp3 plane mask:0x280, primary id:7, cursor_plane:9, from dts Device 'gpio@fec20000': seq 1 is in use by 'gpio@fd8a0000' Could not find baseparameter partition Model: Vicharak RK3588 AXON VO.3 LINUX MPIDR: 0x81000000 boot mode: None No resource file: logo.bmp =================begin=================== 512 bytes read in 20 ms (24.4 KiB/s) rockchip_read_distro_logo: Load logo.bmp from 0:3 =================begin=================== 188054 bytes read in 21 ms (8.5 MiB/s) rockchip_read_distro_logo: Load logo.bmp from 0:3 Rockchip UBOOT DRM driver version: v1.0.1 vp0 have layer nr:2[0 2 ], primary plane: 0 vp1 have layer nr:2[1 3 ], primary plane: 1 vp2 have layer nr:2[6 8 ], primary plane: 6 vp3 have layer nr:2[7 9 ], primary plane: 7 phy@fed80000: mode 0x02 is not support hdmi@fde80000 disconnected phy@fed90000: mode 0x02 is not support CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A) b0pll 24000 KHz b1pll 24000 KHz lpll 24000 KHz v0pll 24000 KHz aupll 786431 KHz cpll 1500000 KHz gpll 1188000 KHz npll 850000 KHz ppll 1100000 KHz aclk_center_root 702000 KHz pclk_center_root 100000 KHz hclk_center_root 396000 KHz aclk_center_low_root 500000 KHz aclk_top_root 750000 KHz pclk_top_root 100000 KHz aclk_low_top_root 396000 KHz Debug: buf[0] = 0x00, expected = 0x80 U-Boot console: ENABLED Net: eth1: ethernet@fe1c0000 starting USB... Bus usb@fc000000: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus usb@fc800000: USB EHCI 1.00 Bus usb@fc840000: USB OHCI 1.0 Bus usb@fc880000: USB EHCI 1.00 Bus usb@fc8c0000: USB OHCI 1.0 Bus usb@fcd00000: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus usb@fc400000: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fc000000 for devices... 1 USB Device(s) found scanning bus usb@fc800000 for devices... 1 USB Device(s) found scanning bus usb@fc840000 for devices... 1 USB Device(s) found scanning bus usb@fc880000 for devices... 1 USB Device(s) found scanning bus usb@fc8c0000 for devices... 1 USB Device(s) found scanning bus usb@fcd00000 for devices... 1 USB Device(s) found scanning bus usb@fc400000 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit key to stop autoboot('CTRL+C'): 0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x1 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x1 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x1 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe Linking... LTSSM is 0x0 pcie@fe150000: PCIe-0 Link Fail Device 0: unknown device MMC: no card present mmc_init: -123, time 14 card not detected! switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:3... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf =================begin=================== 828 bytes read in 25 ms (32.2 KiB/s) phy@fed80000: mode 0x02 is not support hdmi@fde80000 disconnected phy@fed90000: mode 0x02 is not support SCRIPT FAILED: continuing... Device 2: unrecognized JEDEC id bytes: 00, 00, 00 unknown device Device 1: unknown raw ID 0 0 0 Device 0: unknown device Device 0: unknown device scanning bus for devices... SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp fbss pio slum part ccc apst Device 0: unknown device pcie@fe150000: failed to find reset-gpios property ethernet@fe1c0000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! phy_startup() failed: -110FAILED: -110missing environment variable: pxeuuid Retrieving file: /extlinux/pxelinux.cfg/01-0a-e7-d6-85-57-22 ethernet@fe1c0000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! phy_startup() failed: -110FAILED: -110Retrieving file: /extlinux/pxelinux.cfg/00000000 ethernet@fe1c0000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! phy_startup() failed: -110FAILED: -110Retrieving file: /extlinux/pxelinux.cfg/0000000 ethernet@fe1c0000 Waiting for PHY auto negotiation to complete.....